Zebra HC100 Wireless Quick Start Guide

23
Wireless Configuration
Configure Using the Network Setup Wizard
3/3/11 Wireless Quick Start Guide P1001060-006
9. Click Next.
The Wireless Settings window opens.
10. Enter the ESSID.
11. From the drop-down, select your Security Mode.
Important • The ESSID and pass phrase, if used, must be set at your access point before
completing these steps.
If you select… Then…
None Continue with step 12.
WEP 40-Bit
WEP 128-Bit
a. In the WEP Options section of the window, enter the
following values:
• Authentication type
•WEP Index
• Encryption Key Storage
•WEP Keys
b. Continue with step 12.
EAP-TLS
EAP-TTLS
EAP-FAST
WPA-EAP-TLS
In the EAP section of the window, if necessary:
a. Enter the Optional Private Key.
b. Continue with step 12.

Zebra HC100 Specifications

General

Product color	Black