Zebra MC2200 - Trigger Handle; Installing the Trigger Handle Using the Hand Strap Mount; Installing the Trigger Handle Using the Battery Finger Scoop

Accessories
100
Trigger Handle
Installing the Trigger Handle Using the Hand Strap Mount
1. Align the hand strap mount on the back of the device with the recess on the trigger handle.
2. Rotate the trigger handle down to grab the device.
Installing the Trigger Handle Using the Battery Finger Scoop
1. Align the battery finger scoop with the recess on the trigger handle.
2. Rotate the trigger handle down to grab the device.
mc2200-mc2700-a10-prg-en.book Page 100 Friday, September 25, 2020 10:24 AM