Applications
57
PTT Express Voice Client
NOTE: Requires a PTT Express License.PTT Express Voice Client enables Push-To-Talk (PTT)
communication between disparate enterprise devices. Leveraging existing Wireless Local Area Network
(WLAN) infrastructure, PTT Express delivers simple PTT communication without requiring a voice
communication server.
• Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.
• Private Response: Double-press the PTT button to respond to the originator of the last broadcast or to
make a Private Response.
PTT Express User Interface
Figure 5 PTT Express Default User Interface
PTT Audible Indicators
The following tones provide helpful cues when using the voice client.
• Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for you to start
talking.
• Access Tone: Single beep. Plays when another user just finished a broadcast or response. You can
now initiate a Group Broadcast or Private Response.
• Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already
communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60
seconds).
• Network Tone:
Talk Group
Service Indication
Notification Icon
Settings
Enable/Disable Switch
mc2200-mc2700-a10-prg-en.book Page 57 Friday, September 25, 2020 10:24 AM
To Next Page
Loading...