57
QLn Series User Guide
continued
Adjustable Shoulder Strap
Refer to Figure 36 if your printer is equipped with the shoul-
der strap option (p/n P1031365-026). Insert each end of the
shoulder strap into the cut-outs in each top corner of the print-
er and secure the looped end over the button on the end of
the strap to fasten.
Hold the buckle and pull the strap as shown below until you
achieve the desired length.
Figure 36: Using the Optional Shoulder Strap(QLn220 Healthcare Shown)
Insert loop
into cut-outs
on printer.
Button to
secure strap
to printer.
To Next Page
Loading...
