zebris Medical GmbH FDM Technical Data and Operating Instructions Page 9/36
2 Technical data
2.1 General specification for the FDM-Sensor
The sensors of the different FDM system only vary in size of the measuring area, the
number of single sensors included in the sensor module and the supported sampling
frequency. All other technical data is identical.
Interfaces USB
Synchronization input/output
Video synchronization
Infrared synchronization
Connection Interface box on the bottom of housing frame
Measuring principle capacitive force measurement
Operating voltage 16-18V DC
Power consumption max. 40W
Power supply via external power supply unit 100 - 240V AC / 50 - 60 Hz
Operating temperature range 15 to 40°C
Storage temperature -10 to +60°C
Permissible max. relative humidity 80%
Measuring Range 1 – 120 N/cm
2
Accuracy of the calibrated measuring range (1 – 80 N/cm
2
) ±5% (FS)
Hysteresis < 3 % (FS)
Physical resolution 1.4 sensors /cm
2
To Next Page
Loading...
Need help?
General
