Need help?Do you have a question about the Zeiss Axiovert 100 and is the answer not in the manual?
General| Brand | Zeiss |
|---|---|
| Model | Axiovert 100 |
| Category | Microscope |
| Language | English |
General safety precautions for 3D microscopy operation.
Safety and EMC regulations for 3D microscopy components.
Guidelines for unpacking, transporting, and storing 3D microscopy components.
Important usage instructions and precautions for 3D microscopy.
Information on maintenance and authorized repairs for 3D microscopy.
Applications of 3D microscopy in biomedicine and materials microscopy.
Explanation of the 3D microscopy eyepiece version and its operation.
Explanation of the 3D microscopy monitor version and its operation.
Description of the combined eyepiece and monitor version of 3D microscopy.
General guidelines for maintaining and caring for 3D microscopy components.
Instructions for cleaning optical components in 3D microscopy.
Procedure for changing voltage settings and fuses on the 3D-CONTROL DAS-3 unit.
Steps to convert the microscope for the eyepiece version of 3D microscopy.
Describes the connection sockets on the 3D-CONTROL DSA-3 unit.
Explains the functions of the controls on the 3D-CONTROL DSA-3 unit.
Detailed steps for adjusting the 3D illumination shutter.
How to check and adjust the contrast for 3D microscopy.
Procedure to verify and ensure the image is upright.
Steps to convert the microscope for the monitor version of 3D microscopy.
Explains the controls of the MCU II unit.
Recommended basic settings for 3D microscopy using the MCU II.
Instructions for recording 3D video sequences.
How to print 3D video recordings as video prints.
Steps for converting and adjusting the combined eyepiece/monitor version.
How to observe the 3D image using the eyepiece.
How to observe the 3D image on the monitor.
To Next Page