3D Microscopy
Eyepiece and monitor version Axiovert 100/135/135 M
30 B 40-022-4 e 09/98
4 Eyepiece and
monitor version
Before connecting the components, first read
the enclosed manual from Kappa entitled
"
Color TV Camera for Microscopy and 3D
Images
";
chapter 5, "
Safety regulations
", should be
observed in particular.
4.1 Conversion and adjustment
Set up the microscope in accordance with
the operating instructions of the
Axiovert 100/135/135 M
Equip the microscope with LD condenser
0.55 Ph1, Ph2, Ph3, DIC, DIC
Set up the eyepiece version:
see page 18
Set up the monitor version:
see page 24
Connect eyepiece and monitor version in
accordance with the wiring diagram
Fig. 15
Fig. 15 Wiring diagram for eyepiece and monitor version
To Next Page
Loading...
