Instructions for Use Safety notes
8 / 65 305935-9900-000–1.3 – 2020-08-25-for USA
▪ Before an extended period of non-use, remove the battery from the remote control;
▪ Avoid looking directly into the light source, e.g. into the microscope objective lens or into the
light guide, in order to prevent damage to the eye. Do not shine lights in anyone's eyes.
▪ EXTARO 300 can only be used in professional healthcare facility environments such as physician
offices, ENT offices, clinics, hospitals (emergency rooms, patient rooms, intensive care and
surgical rooms without high-frequency surgical equipment). Additionally, it should be used
outside the RF shielded room of medical electrical systems for MRI.
▪ Use of EXTARO 300 adjacent to or stacked with other equipment may result in improper
operation. If such use case cannot be avoided, the user must verify that the EXTARO 300 and
its adjacent equipment are functioning normally before operation.
▪ Depending on the type of application, take appropriate precautions to ensure that the surgical
procedure or treatment can still be completed even if the full functionality of this microscope
(e.g. illumination) is not available.
▪ Before using the system, please check the rotation range of each axis, reference to chapter 11.2
mechanical data for details. If any abnormality is observed, please stop using the system and
contact your local ZEISS Service or an authorized partner.
To Next Page
Loading...
