10
EN
The installation of the solar panel does not need to be moved unless
you want to change the location.
Ensure that the state after disconnection is as shown in following
gure.
Unplug the cables of the Microinverter and the home grid.
Only unplug the cables of the rst solar panel and the Microinverter.
The same way to unplug the cables of the second solar panel and the
Microinverter.
Unscrew the mounting screws of the Microinverter, remove the
Microinverter xed on the solar panel or metal bracket.
If you have installed the balcony solar system, you need to disconnect it
according to the following steps:
Tips:
Tips:
1
1
2
2
3
4
3
4
To Next Page
Loading...