To Next PageTo Next PageHow to troubleshoot no sound on Zenith XBV243?
If you're experiencing no sound with your Zenith DVD VCR Combo, try these steps: * Ensure the equipment connected to the audio cable is set to receive audio signal output. * Check that the audio cables are securely connected. * Verify that the equipment connected to the audio cable is powered on. * Confirm that the Digital Audio Output is set to the correct position, then turn the DVD+VCR on again.
What to do if there is no picture on my Zenith DVD VCR Combo?
If you're not getting a picture on your Zenith DVD VCR Combo, here are a few things to check: * Ensure your TV is set to the correct video input mode for the DVD+VCR signal. * Verify that the TV/VCR mode on the DVD+VCR is set to VCR (the VCR indicator light should be on). * Make sure the video cable is securely connected. * Confirm that your TV is turned on.
Why is Stereo Audio Record and/or Playback is not present on Zenith VCR?
If stereo audio record and/or playback is not present on your Zenith VCR, make A/V connections to the TV A/V In jacks. Select AUX or A/V source as TV input. Set BROADCAST TYPE mode to STEREO.
How to fix a Zenith VCR remote control that is not working?
If your Zenith VCR remote control isn't working properly, ensure it's pointed at the VCR's remote sensor and that you are within 23 feet (7 meters). Remove any obstacles between the remote and the VCR. If the issue persists, replace the batteries with new ones.
What to do if the camcorder image is not shown on Zenith VCR?
If the camcorder image is not showing on your Zenith VCR, ensure the camcorder is turned on and operating properly. Also, verify that the VCR SOURCE is set to AUX by pressing INPUT to select the LINE input channel.
Why are the picture and sound weak on my Zenith VCR?
If the picture and sound of a broadcasting channel are weak or missing on your Zenith VCR, tighten the antenna or cable connections or replace the cable. Try all CHANNEL SOURCE options.
Why is timer recording not possible on my Zenith VCR?
If timer recording isn't working on your Zenith VCR, ensure the clock is set to the correct time. Make sure the VCR is turned off to enable the timer. If the timer has been programmed incorrectly, reprogram it. Note that if the VCR is in Timer Recording mode, this is normal.
What to do if Zenith VCR power is on, but it doesn't work?
If your Zenith DVD+VCR has power but isn't working, ensure a disc or tape is properly inserted. Check that the disc or tape indicator in the display window is lit.
How to turn on Zenith VCR if it has no power?
If your Zenith VCR has no power, make sure the power cord is securely plugged into the wall outlet.
Why is there no sound coming from my Zenith VCR?
If you are experiencing a lack of sound from your Zenith VCR, make sure that the equipment connected with the audio cable is set to receive audio from the VCR. Check that the audio cables are securely connected. Ensure the equipment connected with the audio cable is turned on. If applicable, verify that the Digital Audio Output is set to the correct position, then power the VCR on again.
General| Type | DVD VCR Combo |
|---|---|
| Video Format | NTSC |
| Recording Formats | VHS |
| Remote Control | Yes |
| Playback Formats | DVD, VHS |
| Connections | Composite video output |
