zenpert 3R20 - Media Specifications

5
1.5 Media Specifications
Media Specifications
3R20 Series
Media roll capacity
Max. O.D.: 50 mm (1.97”)
Media type
Continuous, die-cut, black mark
Media wound type
Outside wound
Media length
15 mm (0.59”) ~ 2,794 mm (110”)
Tear mode: 25.4 mm (1”) ~ max. print length
Media width
Without media fixing tabs: max. 80 mm
With media fixing tabs: 1”, 1.5”, 2”, 2.5”
Media thickness
0.06 mm (2.36 mil) ~ 0.20 mm (7.87 mil)
Note: Please locate the black mark on the printing side when using black mark continuous label.