BioHarness Bluetooth Developer Kit User Manual
Page 7
This document is confidential and does not constitute a public document.
Possession should only be under NDA or other relevant confidentiality agreement.
This document has been prepared by Zephyr Technology Ltd and is not to be distributed, copied or reproduced without permission.
9700.0026 © Zephyr Technology 2010 2010-06-02
2. Setup
2.1. System Diagram
2.2. Overview
Do not connect the Bluetooth receiver or the BioHarness Device to a PC until the relevant
driver software has been installed.
The following steps are recommended (in order) for setup and configuration of the system:
• Install Zephyr USB Driver software
• Connect BioHarness Device and cradle to PC for battery charge
• Install & Configure CNet Bluetooth Adapter Driver & IVT BlueSoleil software
• Install Microsoft ® .NET 3.5 Framework
• Copy Zephyr Bluetooth Test App
• Copy BioHarness BT Config Tool
• Install Zephyr BioHarness Application (only if recorded data import required)
BioHarness Device & Strap
Bluetooth Test App
To Next Page
Loading...