BioHarness Bluetooth Developer Kit User Manual
Page 9
This document is confidential and does not constitute a public document.
Possession should only be under NDA or other relevant confidentiality agreement.
This document has been prepared by Zephyr Technology Ltd and is not to be distributed, copied or reproduced without permission.
9700.0026 © Zephyr Technology 2010 2010-06-02
2.3.3. BioHarness BT Config Tool
This utility can be used to set a variety of parameters within the device:
Network ID: Default device serial #
MAC Address to Call: Hard code the MAC address of Bluetooth paired receiver
Visible in Inquiry: Make device discoverable (default Yes)
Link Timeout: Bluetooth link parameter
Lifesign Period: Bluetooth link parameter
Log Enable: Activate logging on button press
Button Enable When Worn: Allow the device to be switched off while still attached to strap
(default No – this prevents accidental switch off of device)
RF Enable: Activate transmitting on button press
Set Date/Time: Set internal clock to current PC time
To Next Page
Loading...