MIDI Operation
MIDI Setup - In / Slave Mode 19
MIDI Setup - Out Mode 19
Use of MIDI - Transferring Memories
Three ways to use Lightmaster XL with MIDI20
Memory Transfer between two Lightmaster
XL desks 20
To send memories to another Desk 20
Requesting memories from the secondary
desk (or another MIDI device) 20
Use of MIDI - Linking Desks
Linking Desks to operate as Master/Slave 21
Advanced MIDI Programming
Desk Memory Organisation 22
Advanced MIDI Programming 22
Set up the desk to respond to the Octave
starting with Middle C (Note Value 60) 22
Set up the desk to respond to external
Program Change commands 22
Check the Program Default setting 22
To run the show 22
MIDI Implementation Chart
NOTES: 24
/P3/3
Error Messages
Memory Problems 25
Hardware Problems 25
Memory Card Errors 25
Technical Specification
Standard Outputs 26
Mains Input 26
Audio 26
Physical Details 26
To change the Mains Fuse 26
WARNING - Mains Supplies 26
Options and Accessories 26
Complementary Products 26
Contents
7359500/P3/3 Page 3
To Next Page
Loading...