_14
Once the remote has been paired with the Titan drone, do not approach the
drone until the remote has been powered off.
4.1.0 TROUBLE SHOOTING
Do not approach the drone again until the remote has been powered
off. If for any reason the Titan does not work after following the
launching steps, please check the following.
a) The Titan battery is fully charged, correctly connected and not
damaged.
b) The batteries in the Remote Control are of the same brand, have
an equal amount of charge and have enough charge to power
the remote control correctly (Using an assortment of batteries will
affect the performance of the Remote Control).
c) The connection between the Remote Control and the Titan may
not have been completed correctly. Ensure that when activating
the connection, the Left Thumb stick (Acceleration/Yaw) is moved
all the way to the bottom and then returned to the middle. If this is
not completed the connection will not activate.
Once these points have been checked turn both the Titan and the
Remote Control off and start the launching process again.
To Next Page
Loading...
