General Maintenance
6.22
Headlight Bulb Replacement
WARNING! Halogen bulbs contain gas under pressure.
Handling a bulb improperly could cause it to shatter into
flying glass fragments, which could result in serious injury.
To help avoid injury:
Turn the key switch OFF and allow the bulb to cool
before changing the bulb.
Leave the key switch OFF until the bulb change is
complete.
Always wear eye protection when changing a halogen
bulb.
Avoid touching the glass.
CAUTION: Using higher wattage bulbs that specified
can/will cause the headlight lens to melt.
To replace the bulb:
1. Working from behind the headlight, disconnect the
headlight bulb connector (A) and rubber cover (B).
Zero Owner's Manual (S and DS).book Page 22 Wednesday, February 28, 2018 11:21 AM
To Next Page
Loading...
