General Maintenance
6.23
2. Remove the headlight bulb retainer (A) by turning it
counter-clockwise.
3. Remove the headlight bulb by pulling it straight out.
CAUTION: Do not touch the glass portion of the headlight
bulb. Keep the headlight bulb free of contaminants. Oil
from your fingers or contaminants will shorten the life of
the bulb. Thoroughly clean any fingerprints or
contaminants from the bulb using a clean cloth moistened
with alcohol.
4. Install the headlight bulb into the lens.
5. Install the headlight bulb retainer and turn it clockwise
until it locks into position.
6. Install the headlight bulb rubber cover.
7. Connect the headlight bulb connector.
Zero Owner's Manual (S and DS).book Page 23 Wednesday, February 28, 2018 11:21 AM
To Next Page
Loading...
Need help?
General
