Zero FX 2018

Troubleshooting
7.4
8 Controller Area Network (CAN) Error Contact Zero or your dealer.
9
Battery Management System (BMS)
Throttle Disable
Contact Zero or your dealer.
10 Module Variance Too High Contact Zero or your dealer.
11 Battery Temperature Sensor Fault
Motorcycle will run, but needs service. Contact your
dealer.
12 Welded Contactor Contact Zero or your dealer.
13 Motor Controller Error
Motorcycle needs service. Contact Zero or your
dealer.
14 Loopback Error Needs second module, or blanking plug inserted.
15
Battery Management System (BMS)
Startup Error
Reset BMS with button. If problem persists contact
Zero or your dealer.
16
Battery Management System (BMS)
Internal Disable
Cycle Ignition Key OFF and then ON again, or reset
BMS with button. If problem persists contact Zero or
your dealer.
17
Battery Management System (BMS)
Internal Fault
Cycle Ignition Key OFF and then ON again, or reset
BMS with button. If problem persists contact Zero or
your dealer.
18 Miscellaneous Error Contact Zero or your dealer.
NUMBER OF RED FLASHES CAUSE SOLUTION
Zero Owner's Manual (FX and FXS).book Page 4 Monday, September 11, 2017 10:13 AM