Zero FX 2018

Controls and Components
3.21
Front Brake Lever Adjuster (FXS only)
The position of the front brake lever can be adjusted by
turning the adjustment knob (A) located on the master
cylinder assembly. Turning the knob clockwise or
counter-clockwise will adjust the distance between the
lever and the throttle control.
Parking Brake Operation (if equipped)
Your Zero Motorcycle may be equipped with a parking
brake system. When applied, the parking brake will
prevent your motorcycle from rolling forward or backward.
A. Parking Brake ON
Parking brake lever pointing away from the
motorcycle.
B. Parking Brake OFF
Parking brake lever pointing toward the center of the
motorcycle.
Zero Owner's Manual (FX and FXS).book Page 21 Monday, September 11, 2017 10:13 AM