Maintaining Your Motorcycle
6.4
7 Drive Chain - Check chain slack/alignment
and condition.
- Adjust and lubricate chain with
chain lubricant thoroughly.
- Replace worn chain.
√ Every 600 mi (1,000 km) and after washing the motorcycle or riding in the rain.
8 Drive Belt - Check belt tension.
- Inspect belt for signs of damage
or cracking.
Replace belt:
- Every 24K mi (37K km).
√√
9Steering
Bearings
- Check for looseness.
- Repack with all-purpose grease.
√√√√Repack √
10 Chassis
Fasteners
- Check all chassis fasteners and
fittings.
- Tighten and adjust as needed.
√√√√√
11 Front Brake
Lever Pivot
Shaft
- Apply silicon grease lightly.
- Check operation and for oil
leakage.
- Service/rebuild if necessary.
√√√√√√
12 Front Fork - Check operation and for oil
leakage.
- Service/rebuild if necessary.
√ √√√√√
# ITEM ROUTINE EVERY
RIDE
INITIAL INITIAL ODOMETER MILEAGE READING
600 mi
(1K km)
or
1 month
4K mi
(7K km)
or
6 months
8K mi
(13K km)
or
12 months
12K mi
(19K km)
or
18 months
16K mi
(25K km)
or
24 months
20K mi
(31K km)
or
30 months
Zero Owner's Manual (FX and FXS).book Page 4 Monday, September 11, 2017 10:13 AM
To Next Page
Loading...
Need help?
General
