Zetor 4341 SUPER - Ballast Weights for 4 Wd Tractors (A); Front Ballast Weights; Rear Wheel Ballast Weights; Under Frame Front Ballast Weights (A)

100
∗BALLAST WEIGHTS
A 132 A 133 A 134
∗ UNDER FRAME FRONT BALLAST
WEIGHTS (A)
ballast weight frame (1) - 20 kg
ballast weights (2) - 135 kg
∗ UNDER FRAME FRONT BALLAST
WEIGHTS (B)
ballast weight frame (3) - 20 kg
ballast weights (4) - 100 kg
∗ BALLAST WEIGHTS FOR 4WD
TRACTORS (A)
ballast weight frame (1) - 20 kg
ballast weights (2) - 100 kg
∗ FRONT BALLAST WEIGHTS
a - ballast weight frame (1) - 20 kg
b - ballast weights in front of mask (2) -
210 kg
c - front three point hitch weights -
holder + 12 pcs of weights - 260 kg
Ballast weight c) with holder is attached
in the front three point hitch lower links.
This weight is intended for assuring of
longitudinal stability when implementa-
tion with heavier implements attached in
the rear three point hitch.
REAR WHEEL BALLAST WEIGHTS
I
2 + 4 pcs - 150 kg for wheel tread 1350
and 1500 mm
II
2 + 8 pcs - 270 kg for wheel tread 1575
to 1800 mm
III
2 + 8 pcs - 270 kg for wheel tread 1500
to 1800 mm
IV
2 + 2 pcs - 90 kg for wheel tread 1350 to
1800 mm
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz