EasyManua.ls Logo

Zetor 4341 SUPER - Air Filter Element Reassembly; Clogging Indicator Reset; Inner Safety Air Filter Element Exchange

Zetor 4341 SUPER
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
136
MAINTENANCE INSTRUCTIONS
A 154 A 155
INNER SAFETY AIR FILTER ELEMENT
EXCHANGE
Inner safety air filter element can
not be regenerated. It must be
exchanged in the following
cases:
- if the main air filter element is da-
maged
- after 5th maintenance of air cleaner
- minimally once per two years
AIR FILTER ELEMENT REASSEMBLY
Be careful at the air filter element re-
assembly:
- keep the contact surfaces clean
- air filter elements must not be defor-
med and must not vibrate after
assembly
- rubber sealing must be fitted properly
round the complete circumference, the
proper tightness of the complete
cleaner must be assured after reas-
sembly of air filter cover
CLOGGING INDICATOR RESET
Reset the clogging indicator after
dry air cleaner maintenance.
PDF byl vytvoen zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz

Table of Contents

Related product manuals