Zetor 4341 SUPER - Front Pto Clutch Valve Control Lever

41
PEDALS AND LEVERS CONTROLLED BY DRIVER
A 58
∗FRONT PTO CLUTCH VALVE CONT-
ROL LEVER
1. Front PTO clutch valve control lever.
a - engaged
b - STOP
Clutch is engaged when the air press is
minimally. 500 kPa (indicated on pressu-
re gauge). The valve insures automatic
disengaging of PTO shaft if the air
presssure drops under 410 kPa ° 60
kPa.
It’s life dangerous to do any re-
pairs or cleaning of front attached
implements driven by front PTO
shaft if the lever is not in STOP
position.
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz