PLANNED TECHNICAL MAINTENANCE
INSPECTION AND TRACTOR MAINTENANCE 1
After engine hours
Inspection and maintenance operation
10
70
100
200
600
1200
1800
2400
3000
3600
4200
4800
5400
6000
ENGINE
Engine oil exchange X X Every 200 hours
Engine oil cleaner exchange X X Every 200 hours
Cylinder head nuts retorque X
Valve clearance inspection and adjustment X X X X X X
Engine lubrication pressure inspection - after starting Every starting
Inspection for oil level and lubrication system leaks X Every 10 hours
Turbocharger compressor housing and intake manifol cleaning X X
Inspection for turbocharger leaks and bearing play X X
Inspection for water pump bearing play X X
ENGINE ACCESSORY
Inspection for leaks and function of hydraulic system clutch control X Every 10 hours
Inspection for coolant level and cooling system leaks X Every 10 hours
Inspection for fuel tank and fuel system leaks X Every 10 hours
Inspection for air pre-cleaner clogging X Every 10 hours
1 Radiator fins cleaning by pressure air X X Every 200 hours
Dry air cleaner maintenance (maintain it depending upon clogging
indicator)
X Every 10 hours
2 Coolant exchange X X X X X
Inspection and adjustment of injection pump X X
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
