STARTING MOVE
A 63
Depress the clutch pedal, select the road
or reduced range speed. Start the en-
gine and set the engine speed for 750 to
800 RPM. Shift the proper gear speed
suitable for starting move and slightly
increase the engine speed. Prepare the
parking brake for releasing. Release the
clutch pedal up to point of the starting
move and simultaneously with engine
speed increasing, continue with smooth
clutch releasing. Fully release the
parking brake.
Start moving smoothly and slowly. Fast
starting move can cause the overload of
transmission, increased fuel consump-
tion, excessive tire wear and damage of
the transported load.
Use the 1 st. gear only for starting move
when driving with heavy trailer going up
the hill and in heavy terrain.
Regularly check the operation engine
regime, engine speed, lubrication,
coolant temperature, air press, battery
charging and fuel level.
Regularly check tightening of the trans-
ported load if the trailer or other imple-
ment is hitched to the tractor.
Don´t use the differential lock when driv-
ing on the dry road or if taking the tu-
rning.
PDF byl vytvo’en zkuˇebns verzs FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
