221
PLANNED TECHNICAL MAINTENANCE
INSPECTION TRACTOR MAINTENANCE 2
After engine hours
Inspection and maintenance operations
TRANSMISSION
Transmission oil cleaner cartridge exchange X X Every 200 hours
Cleaning the magnetic element and trans. oil trainer
∗
X X Every 200 hours
Inspection for oil level in transmission
∗
X X Every 200 hours
3 Exchange of oil in transmission X X X X X
Front PTO oil level inspection X Every 200 hours
3 Front PTO oil level exchange
∗
X X X X X
Greasing of front PTO cardan shaft joint by vaseline X X Every 200 hours
AXLES AND STEERING
3 Exchnge of oil in front axle housing and final drive housings
∗
X X X X X
Inspection for oil level in front axle housing and final drive housing X Every 200 hours
Exchange of oil and hydrostatic steering cleaner cartridge
∗
X X X X X
4 Hydrostatic steering hoses exchange X X
Greasing of front axle pivot pin X Every 200 hours
Greasing of front axle knees (extension) X Every 200 hours
3 Greasing of front wheel hub (add grease max. 1/3 of space) X X X
Greasing of steering ball joints X X X X X X X X X X
3 Greasing of axle bearing at right final drive X X X
3 Greasing of drive shaft joints and grooves of shaft X X X
Inspection for wheel bearing play X X X X X X X X X X X
Inspection for front wheel
toe in X X X X X X X X X X X
Inspection for
torque of bolts, nuts, at steer. con. rod, steering arms and
wheels X Every 200 hours
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
