222
PLANNED TECHNICAL MAINTENANCE
INSPECTION TRACTOR MAINTENANCE 3
After engine hours
Inspection and maintenance operations
HYDRAULIC
Greasing of top sensing torsion bar X X X X X X X X X X
Greasing of top sensing lever X Every 200 hours
Greasing of lift assist cylinder pins X Every 200 hours
Greasing of telescopic control link X Every 200 hours
Greasing of right lifting link X X X X X X X X X X
Greasing of front three point hitch pins X X X X X X X X X X
Inspection for front three point hitch hydraulic circuit leaks X X X X X X X X X X
Inspection for leaks and functions of particular hydraulic systems X X Every 200 hours
BRAKE SYSTEM
Inspection for brake liquid level and brake system leaks X Every 10 hours
Inspection for brake system leaks and trailer brake afficiency X Every 10 hours
Inspection for function and adjustment of service and parking brake X X X X X X X X X X
Air brake adjustment X X X X X X
Greasing of hydraulic brake system control X X
Checking the tightness of air pressure regulator nuts X
Draining the condensed water from air tank X X X X X X X X X X
Greasing of all sliding surfaces of air instruments X X
5 Exchange of rubber parts at brake system X X
6 Air tank revision X X
Exchange
of diaphragm, cleaning and adjustment the air pres. regulator X X
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
