LOOP 500
16
5.3.2 Deactivating and activating alarm devices
An activated alarm device (in case of fire) can be deactivated (inhibited) so that it can be re-activated
either manually (see below) or automatically (in the case of a fresh fire alarm).
Deactivation of an alarm device
To deactivate an alarm device (e.g. No.3), the following keys should be pressed:
OFF
Alarm
device
3
Steps carried out are shown on the display as follows:
A l a r m d e v i c e _ _ 3 O F F L 2 *
−
the ACTIVATION LED in the EXT.AUD.ALARM DEVICE field extinguishes when all alarm devices are
deactivated
−
the alarm device (e.g. Sounder 003) is deactivated
Activation of an alarm device
The following keys should be pressed to activate an alarm device:
ON
Alarm
device
3
The steps carried out are shown on the display as follows:
A l a r m d e v i c e _ _ 3 O N L 2 *
−
the alarm device (e.g. Sounder 003) will be reactivated
Activation of all alarm devices
The following keys should be pressed to deactivate all alarm devices:
OFF
Alarm
device
or
−
press the ON/OFF key in the EXT.AUD.ALARM DEVICE field
−
the ACTIVATE LED in the EXT.AUD.ALARM DEVICE field will extinguish
−
all alarm devices will be deactivated
http://www.firealarmengineers.com
To Next Page
Loading...