Zhone MXK - MXK Hardware Overview

MXK hardware overview
MxK Hardware Installation Guide
19
– Secure bridging: Destination MAC swapping, secure bridging filters
• RSTP on uplinks
• GPON
– Smart OMCI: interoperability with third party ONTs
– 64 splits, class B+ optics
– Dynamic GEM port creation
The MXK can be managed with:
• Command line interface (CLI)
• ZMS
• WebUI
MXK hardware overview
This sections describes the MXK hardware, including:
• MXK 819 and 823 chassis, page 19
• MXK 319 chassis, page 22
• MXK slot cards, page 22
• Small form factor pluggables, page 24
• MXK backplane, page 24
MXK chassis
The 8U 19-inch and 23-inch chassis and the 3U chassis are functionally
equivalent, the only difference is the number of slots supported.
You can install the uplink cards, that provide the primary control and
management functions for the MXK system, in a redundant pair to provide
card-level redundancy. Figure 4 shows the 19” MXK chassis with 14 line
cards and two uplink cards.
MXK 819 and 823 chassis
The MXK 8U chassis currently comes in two sizes:
• MXK 819
19-inch wide, 8U high unit contains 14 line card slots and 2 uplink slots
• MXK 823
23-inch wide 8U high unit contains 20 slots, 18 line card slots and 2
uplink slots