801525 v3.05 09.20 HT C Com Install Instructions Page 5 of 16
Thank you for purchasing a Zip Chilled HydroTap. Please read and follow these instructions carefully to ensure
safe operation and trouble free service. If service is required, please call your Zip Service Provider.
What is the Zip HydroTap ?
The Chilled Zip HydroTaps are electronically controlled to supply filtered and Chilled drinking water for
kitchens and tea rooms. The Chilled HydroTap units are under bench drinking water appliances with a
dispensing tap mounted on a sink or bench, which may be used for commercial applications. These units
utilise a conventional refrigerant compressor to chill the water which is factory set to 5-9°C. These units are
NOT designed to be used for sanitary fixtures.
The water filter is a disposable item which will require periodic replacement and is covered by a limited OEM
warranty.
It is important that the Installation be done safely, correctly and completely, in order to utilise all the benefits
the HydroTap can provide. Each unit can be ordered with the Tap Head Assembly for disabled use. The
disabled levers are supplied with Braille caps for the visually impaired.
General Product Features
HydroTap C125
HydroTap C175
To Next Page
Loading...
