26
Quick Start Installation Guide
807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
SECTION 13: Commissioning
13.5 Filter flush
• Follow the steps on-screen to flush the
filter.
• Open filter door & uncoil flush line.
• Direct flush line into bucket.
• Place a cloth or towel under the filter
cartridge to catch any water that may
spill.
• Open the stop cock valve.
• Start filter flush.
• Once the filter flush is finished, close the
stop cock valve.
• Wipe up any spills.
• Close the door to secure the appliance.
Stop cock valve open
Stop cock valve closed
To Next Page
Loading...
