Quick Start Installation Guide
807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
27
SECTION 13: Commissioning
13.5.1 Limescale filter flush
• Disconnect the limescale filter OUT hose
from the Command Centre manifold.
• Direct it into a 15 litre container.
• Touch green play icon to start filter flush.
• Once the filter flush is finished, reconnect
the limescale filter OUT hose to the
Command Centre manifold.
• Touch the arrow to go to the next screen.
• Follow the steps on-screen.
• (Selecting NO advances the screen to the next process).
(UK only, If optional limescale filter is
installed)
To Next Page
Loading...
