Zip HydroTap G5 - Page 32

32
Quick Start Installation Guide
807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
SECTION 13: Commissioning
• Read the on screen information and
instructions.
• Note When the cleaning process
completes there is an opportunity to
re-install the filter while the boiling
calibration is finishing.
• Unscrew the HydroTap Clean can (2).
• Ensure to hold the adapter in place while
unscrewing the can.
• This screen is shown after completion of
the boiling calibration and or cleaning
processes.