34
Quick Start Installation Guide
807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
SECTION 13: Commissioning
• Empty the hot tank first (boiling models).
• Select NO if it is not safe to continue.
• Select YES to continue safely.
13.9 Tank flush
• Read the on screen information and
instructions.
• Touch the green arrow to run.
• There are two ways to empty the hot tank:
• Dispense boiling water from the tap using
the tap safety feature.
• OR
• Touch and HOLD the green run arrow
icon to dispense directly from the
touch screen display.
• If choosing to dispense directly from the
touch screen display, ‘dispensing boiling
water’ text flashes on the screen while
holding the button.
• After the boiling tank is emptied the
system progresses to the tank flush screen.
• If NO is selected (indicating that it is not
safe to continue) the screen will prompt
the user to clear the sink area.
• Once it is safe to continue select YES to
empty the hot tank.
• Note For all models, the on screen cycle counter displays the number of
remaining cycles in the tank flush process.
• Monitor the on screen information.
To Next Page
Loading...
