Quick Start Installation Guide
807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
35
• Monitor the on screen information.
• The hot tank will cycle twice.
• The cold tank will cycle three times.
SECTION 13: Commissioning
• Note For all boiling models, if after
filling the hot tank during the tank flush
process, the hot water temperature is
still above 50
0
C the tank will need to be
emptied again.
13.10 Select the booster
• Read the on screen instructions.
• Select the appropriate option.
• BCU100 models select Booster installed.
• All other models, Booster not installed.
To Next Page
Loading...
