Instructions. V1.01 Page 10 JUNE / 2013
Models P4/52,P4/52UB, P4/102, P4/102UB
A manually resettable cut out that may be reset by a qualied electrician once the fault has
been corrected
Models C2/50, C2/100
A thermal fuse which should be replaced by a qualied electrician.
Model C3/50
An automatically ressttable cut out, reset by simply switching off the electrical supply to the
unit for at least 2 minutes.
When power is restored the cut out will have reset. However if the fault persists then the unit
should be isolated from the power supply and fault nding be carried out by a qualied
engineer.
Safety Cut Out.
In the event of a malfunction that leads to an over temperature situation, a safety cut out will
automatically cut off the electrical supply to the element (refer g.4).
The cut out and reset operations for the various models are described below.
To Next Page
Loading...
Need help?
General
