Need help?Do you have a question about the ZKETECH EBC-A10H and is the answer not in the manual?
Tester for charging/discharging batteries like NiMH, NiCd, LiPo, LiFe and Pb, supports capacity tests.
Supports charging/discharging and testing capacities of portable power banks.
Supports performance and aging tests of various DC power supplies.
Supports Standard Charging (NiMH, NiCd, LiPo, LiFe, Pb) and CHG-CV (constant voltage).
Supports DSC-CC (constant current) and DSC-CP (constant power) discharging modes.
Supports 'charging-discharging-charging' circles for capacity tests.
Details voltage and current accuracy specifications and ranges.
Details the four banana jacks (A+, V+, V-, A-) for connecting test objects.
Describes connecting the tester to a computer via USB-TTL cable.
Specifies the required DC power supply (12-19V, 4A or above).
Explains the SET knob, ON button, and the start of the testing interface.
Details specific operation modes like DSC-CC and DSC-CP shown on the testing interface.
Guides users on how to navigate and change parameters within the setting interface.
Provides a step-by-step guide and examples for setting up various tests.
Important safety guidelines including connection polarity and operating range.
Provides details on PC software, technical support contacts, and store information.
General| Brand | ZKETECH |
|---|---|
| Model | EBC-A10H |
| Category | Test Equipment |
| Language | English |
To Next Page
