http://www.zketech.com
EBC-A10H User Manual
Copyright (C) 2006-2016 ZKETECH
1. Features
1.1 Battery capacity test
The tester is designed for charging and discharging a wide range of batteries/battery banks, like
NiMH, NiCd, LiPo, LiFe and Pb and it supports capacity tests.
1.2 Portable Power Bank Test
This tester supports charging and discharging of portable power banks, as well as testing their
capacities.
1.3 Power Performance Test
This tester supports performance and aging tests of various kinds of DC power supplies.
2. Specifications
1) Power Supply: DC 19-24V, 4A or above
2) Voltage Setting Range: 0-30.00V, stepper 0.01V (During charging, the maximum voltage is
limited to power voltage -2V)
3) Current Setting Range:
for charge, 0.05-5.00A, stepper 0.01A (current adjusted automatically when power exceeding
limits)
for discharge, 0.05-10.00A, stepper 0.01A (maximum current should be power current-0.5A)
4) Charging mode:
² Standard Charging: Support NiMH, NiCd, LiPo, LiFe and Pb batteries
² CHG-CV: Current and voltage can be set at a constant voltage (only for batteries)
during discharging
5) Discharging mode:
² DSC-CC: Discharging batteries at a constant current, support testing battery capacity
or current of power supplies
² DSC-CP : Discharging batteries at a constant power, for constant power
equipment-like use or testing power
6) Automatic Charging/Discharging: The tester supports “charging-discharging-charging”
circles for capacity tests.
7) Voltage accuracy: between 0-4.5V, 0.003V, ±0.5%, between 4.5-30V, 0.01V, ±0.5%.
8) Current accuracy: 0.05-10.00A, 0.005A, ±0.5%.
9) Capacity detection: < 10Ah,0.001AH; 10-100Ah,0.01Ah; > 100Ah,0.1Ah
To Next Page
Loading...
