ZKTeco MA300 User Manual

MA300 User Manual
Page | 11 Copyright©2023 ZKTECO CO., LTD. All rights reserved
Product Appearance 2.2
Front View:
 LED Indicator: The LED indicator is used to display device operation
results and exceptional statuses which are defined as follows:
Common Rules: If an operation succeeds, the green indicator is solid
on for one second; otherwise, the red indicator is solid on for one
second.
Enrollment State: The green LED blinks three times every other three
seconds.
Single User Deletion: The red LED blinks three times every other
three seconds.
Verification State: The green LED blinks once every other two
seconds.
LED Indicator
Card Swiping Area
Fingerprint Sensor

ZKTeco MA300 Specifications

General

Type	-
Product color	Metallic
Cards capacity	10000 cards
Fingerprint reader	Yes
Authentication type	Biometric
International Protection (IP) code	IP65
RS-485 ports	1
Built-in display	No
Operating temperature (T-T)	-10 - 60 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	34.5 mm
Width	148 mm
Height	73 mm