ZKTeco SpeedFace-V5L TI Quick Start Guide

Once ZKBioAccess MTD software installed, users could perform temperature detection
management on browser.
Real-time monitoring on the ZKBioAccess MTD software
Notes:
Effective distance
Face: 0.3-2m
Temperature: 30-120cm
Effective distance:
Palm: 30-50cm
14
The effective distance for temperature detection is within 50cm.
Temperature measurement data is for reference only, not for medical use.
Remove the mask to register the face, wear a mask to recognize the face, the type of
mask, the size of the face covered by the mask, and bangs will affect the facial recog-
nition effect.
Recommended for indoor use.
Facial verification for masked individuals will increase FAR. Palm verification for
masked individuals is recommended.
1.
2.
3.
4.
5.
Please set the IP address and cloud service server address on the device and add the
device to the software.
Click [Temperature Detection] > [Temperature Management] > [Real-time moni-
toring] to view all the events include the Abnormal Temperature, No Masks and
Normal Records.
Click [Temperature Management] > [Statistics Panel] to view the analysis of statis-
tical data and view the personnels with normal temperature.
As shown in the following figure.
1.
2.
3.

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)