ZKTeco X8-BT User Manual

10
Factory Defaults (Eight passwords for opening the door are set to 0
after reset)
Parameters Type Defaults
Unlocking Duration 6s
Verification Mode Fingerprint/Password/RF Card
Door Sensor Type None
Alarm Switch enable
Administrator
Authentication Alarm
enable
Tamper Alarm enable
Door Sensor Delay 10s
Technical Specifications
Fingerprint Collector SilkID Fingerprint Reader
Key Type Touch key
User Capacity 500
Fingerprint Capacity 500
Card Capacity 500
Access Control Function Unlocking, Alarm, Lock driver time length
Alarm Function
Tamper Alarm, Failed Authentication Alarm, Door
Sensor Alarm
Doorbell External wired doorbell

ZKTeco X8-BT Specifications

General

Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	20 - 80 %
DC input voltage	12 V

Weight and Dimensions

Width	90 mm
Height	38.9 mm