3
❶ Specifi ca ons
1.1 I Descrip on
1.2 I Technical specifi ca ons
Unit FloPro™ e3
Opera ng water temperature 2 to 35°C
Nominal voltage of motor 230 Vac-50 Hz
Motor power - phases 1P
Admissible varia on in motor voltage ± 10% (during opera on)
Motor output power (P2)
HP 1
W 750
Maximum power at motor input (P1) W 1000
Maximum motor amperage A 6.5
Cable cross-sec on
mm² 3x1.5
Lug
type
3G1.5
Electrical protec on A 10
Primary protec on 8A fuse 32x6.3mm
Motor protec on ra ng IPX5
Maximum pump fl ow m³/h 22.4
Pump fl ow rate at 10 meters of head m³/h 16.3 (at 2850 RPM)
Maximum pump pressure
mH
²
O
19.1
bar 1.9
Pump pipe connec on
2” threaded suc on/discharge
Ø63/50 mm union couplings
Maximum pump salinity 6g/L (6000 ppm)
Pipes
Maximum suc on rate at
1.8 metres/second
Maximum discharge rate at
2.4 metres/second
Ø 50 mm 14 m³/h 19 m³/h
Ø 63 mm 20 m³/h 27 m³/h
A
FloPro™ e3 pump
B
Union connec on Ø63/50 mm x2
C Pump base
EN
To Next Page
Loading...
