Zodiac MX.6 - SECTION I - INSTALLATION; PREPARING YOUR POOL AND FILTRATION SYSTEM; Pool water chemistry guidelines

6
While the MX
™
6 is designed for easy installation,
some preliminary steps will assist the installation process.
Where possible, assembly should take place as close to the weir
as possible.
PREPARING YOUR POOL AND FILTRATION SYSTEM
1) Empty the weir basket.
2) Clean the pump basket.
3) Backwash and rinse the filter until the sight glass is clear.
4) Adjust all return jets (whether your pool has one, two or more) to
point downwards and towards the center of the pool so that you DO
NOT see a circular water ow or ripples on the surface of your pool.
5) Ensure your water chemistry is correct. See page 11 or below for
more on this.
* When using chemicals, always follow manufacturer’s directions and follow the advice of your
pool professional. Always use protective clothing, gloves and glasses. Store and use chemicals
out of the reach of children.
Pool Type
pH
pH
Free Chlorine
(ppm)
Cyanuric Acid
(ppm)
Calcium Hardness
(ppm)
Total Alkalinity
(ppm)
Marbelite 7.4 - 7.6 2 - 4 ppm 40 ppm 200 - 250 ppm 80 - 125 ppm
Vinyl/
Fibreglass
Painted
7.6 2 - 4 ppm 40 ppm 175 - 225 ppm 125 - 150 ppm