Zodiac MX.6 - SECTION 2 - CORRECT SETTINGS; AUTO WEIR VALVE operation and settings; ADJUSTMENT SETTINGS for performance issues

10
SECTION 2 – CORRECT SETTINGS
ADJUSTMENT SETTINGS
You will only need to adjust the Auto Weir Valve if the following occurs:
AUTO WEIR VALVE
The Zodiac Auto Weir Valve is preset at the factory to obtain maximum
pool cleaning efciency. Your MX
™
6 is preset on setting 2. However, if
you do experience difculties, it can be manually adjusted to one of the
three settings – high, medium or low (see Adjustment Settings below).
TURNING YOUR MX
™
6
OFF IS MADE
EASY WITH
THE AUTO
WEIR VALVE
You no longer need
to remove the
Zodiac Auto Weir
Valve from the weir.
®
TURNING YOUR MX
™
6
OFF IS MADE
EASY WITH
THE AUTO
WEIR VALVE
You no longer need
to remove the
Zodiac Auto Weir
Valve from the weir.
®
NOTE: To obtain maximun
Diaphragm efficiency, please
ensure a genuine Zodiac
Auto Weir Valve is used.
®
PROBLEM SOLUTION
Your MX™6 Pool Cleaner
is performing too fast and/
or climbing above the
level of water
Reduce Auto Weir Valve
to medium(2) or low(1)
setting
Your MX™6 Pool Cleaner
is performing slowly and/
or not climbing the pool
walls
Increase Auto Weir Valve
to medium(2) or high(3)
setting