11
SECTION 3 – CARE AND MAINTENANCE
Sunlight, water and pool chemicals create a harsh environment. With care
and regular maintenance your MX
™
6 will remain in the best
possible condition.
To properly care for your unit: –
1. Remove the MX
™
6 from the
pool before shock treatment and
reinstall at least four hours later.
2. The weir basket, pump basket,
cartridge, sand filter (which ever
is applicable) should be thoroughly
cleaned on a regular basis to ensure
optimum pool cleaner efciency.
3. Before backwashing your filter,
always disconnect the hose from
the weir.
4. Never “coil” the hose and always
store them straight.
Note: Your pool cleaner will
discolour over time, but this will
not change the performance of
the unit.
5. Large foreign objects, such as toys
and branches should be removed
manually from the pool cleaner.
Zodiac
®
recommends the following water chemistry readings for optimal
performance of any pool equipment:
* When using chemicals, always follow manufacturer’s directions and follow the advice of
your pool professional. Always use protective clothing, gloves and glasses. Store and use
chemicals out of the reach of children.
incorrect
correct
Pool Type pH
Free Chlorine
(ppm)
Cyanuric Acid
(ppm)
Calcium
Hardness(ppm)
Total Alkalinity
(ppm)
Marbelite 7.4 -7.6 2 - 4 ppm 40 ppm 200 - 250 ppm 80 - 125 ppm
Vinyl/
Fibreglass
Painted
7.6 2 - 4 ppm 40 ppm 175 - 225 ppm 125 - 150 ppm
To Next Page
Loading...
