12
1. Push the yellow release button on
the top of the cleaner.
2. Rotate the top cover back until it
clicks into an upward position.
3. Look into engine and remove
debris that is present.
4. If needed, slowly push engine
paddles forward and/or
backwards to move stuck debris
to an accessible position and
then remove it. When moving
the engine paddles, make sure
the cleaner tracks are allowed to
move freely as they will turn as
the engine paddles rotate.
5. Close top cover and ensure it
clicks into place.
WARNING: To avoid serious injury, make sure that the cleaner is
disconnected from the hose and the suction pump is turned off prior
to starting this operation.
REMOVING DEBRIS FROM ENGINE
SECTION 3 – CARE AND MAINTENANCE
To Next Page
Loading...
