Zodiac MX6 - Troubleshooting

8
2.3.3 "Cyclonic™ Leaf Catcher" connecon (according to model)
• Connect the Cyclonic
TM
Leaf Catcher to the hose assembly which is closest to the sucon line or the skimmer (see
image or ).
• Tilt the Cyclonic
TM
Leaf Catcher by following the indicaons: "PUMP" = ltraon pump side / "CLEANER" = cleaner
side (see image ).
• For the bet operaon, posion the Cyclonic
TM
Leaf Catcher vercally to the water surface (see image ).
Connecon to the sucon line Connecon to the skimmer Connecon direcon
Vercal posion
Tip: Protect the ltraon system by connecng the Cyclonic
TM
Leaf Catcher
The Cyclonic
TM
Leaf Catcher is used to retain the debris before it is sucked into the ltraon system as this
may cause long-term damage to the equipment. It also enables the debris to be removed more easily than
in the pump lter basket and has the advantage that it is transparent so you can see when it needs to be
cleaned.