11
4.2 I Cleaning the propeller
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when handling the propeller
.
• Remove the fi lter using the handle (see image ).
• Remove the external fl ow guide by li ing it so as to clear the clips (see image ).
• Upon fi rst removal, you will no ce that the internal fl ow guide is securely ghtened, which is why we recommend inser ng
a screwdriver into the holes to loosen it by turning the screwdriver in the an -clockwise direc on (see image
Upon fi rst removal, you will no ce that the internal fl ow guide is securely ghtened, which is why we recommend inser ng
).
• Once the internal fl ow guide has been loosened, unscrew it by hand (see image
a screwdriver into the holes to loosen it by turning the screwdriver in the an -clockwise direc on (see image
).
• Remove the internal fl ow guide (see image
Once the internal fl ow guide has been loosened, unscrew it by hand (see image
).
• Put on a pair of gloves and pull the propeller, holding it fi rmly to take it out (see image ).
• Remove any debris (leaves, stones, etc.) which may be blocking the propeller (see image
).
EN
To Next Page
Loading...
Need help?
General
