What do error codes Er: 02 Er: 03 Er: 05 Er: 06 mean on Zodiac Vortex RV5380 Swimming Pool Vacuum?
If your Zodiac Swimming Pool Vacuum displays error codes Er: 02, Er: 03, Er: 05, or Er: 06, inspect the brushes and wheels for any obstructions. Rotate the wheels (1/4 turn) to dislodge any trapped debris.
General| Pool Type | In-ground |
|---|---|
| Cleaning Coverage | Floor, walls, and waterline |
| Type | Robotic |
| Pool Surface Compatibility | All surfaces |
| Cleaning Cycle(s) | Floor Only, Floor/Walls/Waterline, Custom |
| Filter Type | Filter canister |
| Cable Length | 18 meters |
Essential safety precautions to prevent serious injury or death during operation.
Specific safety advice for electrical connections and appliance use.
Guidelines for pool preparation and cleaner operation within specified conditions.
Warnings and advice for using the cleaner on vinyl pool liners to avoid damage.
Visual identification and overview of the cleaner's parts and models.
Detailed technical specifications, dimensions, weights, and parts inventory.
Step-by-step guide for setting up the cleaner and its control box near the pool.
Procedures for assembling the caddy for convenient storage and transport.
Explanation of how the pool cleaner functions and its cleaning capabilities.
Essential steps to prepare the pool environment before operating the cleaner.
Correct procedure for immersing the cleaner and managing the floating cable.
Safe and correct method for connecting the cleaner's control box to the power supply.
Instructions on starting, selecting modes, and adjusting cleaning cycles.
How to safely end a cleaning cycle and remove the cleaner from the pool.
Guide to setting the clock and programming automated cleaning schedules.
Instructions for operating the cleaner using the remote control and synchronizing it.
Recommended methods for cleaning the exterior of the pool cleaner.
Steps for cleaning the filter and when to replace it for optimal performance.
How to safely remove debris from the cleaner's propeller.
Instructions for checking brush wear and replacing them.
Steps for replacing the tyres on the pool cleaner.
Solutions for common problems like poor cleaning or movement issues.
Interpretation of flashing LEDs, error codes, and their remedies.
How to access and use the pre-diagnostic menu for appliance status.
To Next Page