Steam Vent
Case
Holding
Part
Steam Vent Cap
Remove from here.
Steam Vent Gasket
Projected
Part
-~~
.
Gap Steam Vent Cap
Holding Part Axis
Steam Vent Cap
CLEANING
AND
MAINTENANCE
{cont.)
HOW TO CLEAN THE STEAM VENT SET
20
Please allow the Rice Cooker to cool down before cleaning.
Wash the Steam Vent Case, Steam Vent Cap and Steam Vent Gasket under running
water and wipe with a soft cloth.
How to dissemble the Steam Vent Set
1. Press in the Holding Part (
G)
)
and pull upward (@ ) to open.
2. Release the Steam Vent Case at
an upper oblique angle ( ®
).
3. Remove the Steam Vent
Gasket.
Steam Vent Case
How to assemble the Steam Vent Set
1. Match the projected part of the Steam Vent
Gasket with the Releasing Gap to attach.
2. Insert the Axis of the Steam Vent Case
(2 parts) into the Hollows of the Steam
Vent Cap (2 parts). Then close the case
until you hear the click sound from the
Holding Part.
The illustration of the Steam
Vent Gasket when set with
the Steam Vent Cap.
........
Releasing
0
\
~fteam
Vent
~
LJLGasket
Steam Vent Cap
X
f
~~team
Vent
~
~
L Gasket
Steam Vent Cap
REPLACEMENT
PARTS
• Please replace damaged parts for optimum performance.
• When replacing parts, please check the model number
and the parts name beforehand, then contact the store
where you purchased the Rice Cooker or Zojirushi
Customer Service.
Zojirushi Customer Service
1-800-733-6270
www.zojirushi.com
Parts Names Parts Number
Inner Lid Set
(1
.
0L
model) C114-6B
Inner Lid Set
(1
.8L model) C115-6B
Inner Cooking Pan
(1
.
0L
model) B458-6B
Inner Cooking Pan
(1
.8L model) B459-6B
Spatula SHAKN-6B
Spatula Holder
618112-00
Measuring Cup
615784-00
To Next Page
Loading...
Need help?
General
